A good kitchen appliance package starts with a coordinated plan: the right range, refrigerator, ventilation, and cleanup setup for the room you are building.
Matching appliances can give a kitchen a more intentional look, but appearance is only one part of the purchase. Each appliance has its own opening, utility connections, and installation requirements. This guide shows how to build a Forno kitchen appliance package around your space and cooking routine, then review the details before ordering.
Plan the kitchen you will use every day.
Start with the meals you make and the space you have. Decide where groceries are stored, where food is prepared, and where dishes are cleaned. The appliances should support that sequence without making doors, drawers, or walkways compete for the same space.
Replacing appliances in existing cabinets calls for a different approach from building a new kitchen. With existing cabinetry, approved fit often decides the shortlist. With new cabinetry, choose the appliances early enough for the installer and cabinet maker to work from their exact documents.
Choose your package by function, then by finish.
| Appliance | Decision to make | Detail to confirm |
|---|---|---|
| Range or cooktop | Cooking style, nominal width, and fuel | Model-specific opening, connections, and clearances |
| Refrigerator | Storage layout and capacity | Door swing, trim configuration, airflow, and water supply where needed |
| Range hood | Ventilation suited to the cooking appliance | Duct route, mounting height, electrical needs, and any local requirements |
| Dishwasher | Cleanup capacity and installation type | Cabinet opening, water, drain, and electrical connections |
| Microwave or wall oven | A useful addition to your cooking routine | Exact installation style and manufacturer-approved trim or cabinetry |
A package does not need every category to be useful. Include the appliances you need and identify any existing appliance you plan to keep. Review the written component list; a lifestyle image is not a packing list.
Fuel Details: electric, gas, or dual fuel?
Choose the cooking appliance’s fuel before finalizing your package. An electric range requires a suitable electrical installation. A gas range requires the specified gas supply and electrical connection. A dual fuel range combines a gas cooktop with an electric oven, so both supplies belong in the project plan.
Fuel conversions, where permitted, depend on the exact model and manufacturer instructions. Ask your installer to check the fuel type, circuit, receptacle or connection method, and ventilation before ordering. A matching finish does not make two ranges interchangeable.
An electric cooking path: Galiano FFSEL6083-36.
The Galiano FFSEL6083-36 is a 36-inch electric range. It is a useful starting point for a package designed around electric cooking. Match its installation requirements to your kitchen before choosing the refrigerator, hood, and dishwasher around it.
This is a radiant electric model, not an induction range. Make that distinction when comparing how you want the cooktop to work.
A dual fuel cooking path: Galiano FFSGS6156-36.
The Galiano FFSGS6156-36 gives you a 36-inch dual fuel option for a coordinated kitchen. Consider it when your project includes the required gas and electrical supplies and you prefer a gas cooktop with an electric oven.
Choose the range because it fits your cooking routine and site requirements. Then select the rest of the package to suit your storage, ventilation, and cleanup needs.
Let the refrigerator shape the storage side of the room.
A refrigerator can change the entire appliance plan. A paired configuration needs room for both doors, the specified trim, and the required airflow. Forno’s Maderno FFFFD1722-60SG combines two 28-inch units with decorative trim for a 60-inch presentation; do not plan that installation from the single-unit width.
Review our Forno refrigerator buying guide to compare configurations. Choose the refrigerator before your cabinets are finalized, then confirm how its finish and handle details work with the selected range.
Example package plans to build from
Replacing appliances in an existing kitchen
Start with the approved range and refrigerator openings. Add a hood that suits the cooking appliance and an appropriately sized dishwasher. Keep a usable existing microwave if it still fits the layout. This approach helps you focus the budget on the appliances that need replacing.
Planning a complete renovation
Select the range and refrigerator first, then coordinate the hood, dishwasher, and optional microwave or wall oven. Give the installer a model-by-model schedule before utility work and cabinetry begin. Include the selected finish suffixes, not only the product family names.
Planning a larger storage setup
Begin with the paired refrigerator arrangement, then plan the cooking and cleanup zones around it. Confirm the delivery route and the space needed for both refrigerator doors. A wide appliance presentation should still leave a kitchen that is comfortable to move through.
These are planning examples, not fixed bundles or promises of compatibility. Use Build Your Own Kitchen Package to choose the exact products for your project.
Compare the complete cost of the project.
Review the current item prices and any documented package offer alongside the cost of installation, utility changes, ventilation work, and required trim or accessories. A lower appliance subtotal may not be the better fit if it requires substantial changes to the room.
Compare package pricing against the same exact component SKUs sold individually. Do not assume every combination receives a discount. Request a written quote that identifies the products, finishes, delivery coverage, and any applicable project pricing.
Delivery, warranty, and the final order review
Forno in-home delivery is available in qualifying service areas. Confirm your ZIP code, access conditions, and delivery arrangements before ordering. Delivery does not automatically include installation, utility hookups, or removal of old appliances.
Review the warranty for each component. Forno lists two-year parts-and-labor coverage for the featured Galiano ranges, subject to its written terms and exclusions. Save the order details and model information for registration and future service.
- Confirm the full component list and quantities.
- Match every finish, fuel configuration, and model suffix.
- Have the installer approve each appliance’s documents.
- Confirm delivery access and project timing.
- Review the applicable shipping and return terms before checkout.
Frequently asked questions
What is included in a Forno kitchen appliance package?
The exact component list controls what is included. Some packages include two appliances; others include more. Check the model numbers and quantities rather than assuming every photographed appliance is supplied.
Can I build my own Forno appliance package?
Yes. Use Smokeforges’ Build Your Own Kitchen Package to select the appliances and finishes you need, then review the complete list or request a project quote.
Does a matching package guarantee that every appliance will fit?
No. Each appliance has separate dimensions, clearances, and utility requirements. Your installer should review every model before cabinetry or utility work begins.
Are kitchen appliance packages always cheaper?
Savings depend on the current offer and exact components. Compare the package with the same individual SKUs, and include installation and required accessories in your project budget.
Build a Forno kitchen package around your project.
Choose the appliances you need, select each finish, and review the complete setup. Send your component list, opening measurements, and delivery ZIP code when you request a quote.
