Your selected items
Got a project?
Let’s plan the right parts.
Majestic Jasper 30 Direct Vent Gas Fireplace Insert
Build your fireplace
Choose one option at a time. Each selection opens the next step; extras are optional.
A starting setup for your model
Base product + required selections shown
Your selected items
Questions about this product?
Call a product specialist: 833-777-2962
Got a project?
Let’s plan the right parts.
Majestic · Direct Vent Gas Insert
Turn a drafty masonry fireplace into an efficient gas fire.
This direct vent insert slides into an existing fireplace opening and vents through liners run up the chimney, giving you dependable gas heat and a clean, finished look without rebuilding the fireplace. Configure the size, finishing front and interior in the builder above; only parts listed by the manufacturer for your exact model are shown.
Performance Highlights
Designed around your space
- IntelliFire Ignition System
- Ceramic Glass
- Glowing Embers/Lava Rock
- Battery Back Up
- Electrical Cord - 10' 3" Left, X 7' 6" Right
- Gas Flex Connector
Fuel Details
Ships as a natural gas unit. Propane conversion uses the approved kit (LPK-MI-IPI), selectable in the builder above and installed by a qualified technician.
Venting components are specific to your installation and are not included. Call us with your vent route and we will help plan the parts list with your installer.
Maximum rated input: 30,000. Values apply to the stated fuel.
Product Details
What It Comes With
- One Jasper 30 Direct Vent Gas Fireplace Insert in the selected model and fuel configuration
- Ceramic glass
- Glowing embers and lava rock
- Battery-backup provision and gas flex connector
Required finishing selections sold separately: Front, door or surround, Insert venting kit. Venting or chimney components, optional accessories, construction materials and installation are sold separately unless explicitly included above.
Manufacturer warranty
The applicable Hearth & Home Technologies limited warranty sets coverage periods, component coverage, eligibility and exclusions. Review the written warranty supplied with the appliance and the linked owner’s manual; contact Smokeforges for the policy that applies to your model.
Project support
Got a project? Let’s plan the right parts.
Share your fireplace model, measurements and finish preferences. Ask about project or bulk pricing when ordering multiple units.
Specifications & Dimensions
| Specification | JASPER30IN |
|---|---|
| BTU input | 30,000 |
| Viewing area | 27-1/2" × 15-15/16" |
| Venting | Direct Vent |
| Ignition | IntelliFire Plus (IPI) |
| Overall height | 20-3/4" |
| Overall depth | 14-1/2" |
| Min. opening width | 31-5/8" |
| Min. opening height | 21" |
| Min. opening depth | 15" |
| LP conversion kit | LPK-MI-IPI |
| UPC | 652174913763 |
| Shipping weight | 70 lb |
Dimensions are in inches unless stated otherwise. Nominal size and viewing area are not the rough opening. Confirm the exact model, revision, vent route, clearances and finishing method in the installation manual before framing. The model-specific installation manual controls where a general guide differs.
Manuals, Spec Sheets & Installation
Use the document for the exact selected model and revision. Shared manuals list the covered model numbers inside the document.
