Your selected items
Got a project?
Let’s plan the right parts.
Majestic Lanai Outdoor Linear Gas Fireplace
Build your fireplace
Choose one option at a time. Each selection opens the next step; extras are optional.
A starting setup for your model
Base product + required selections shown
Your selected items
Questions about this product?
Call a product specialist: 833-777-2962
Got a project?
Let’s plan the right parts.
Majestic · Outdoor Gas Fireplace
An outdoor fire that anchors the whole patio.
Built for covered and open outdoor living spaces, this fireplace gives your patio a gathering point for cool evenings, with construction and materials rated for outdoor installation. Configure the size, finishing front and interior in the builder above; only parts listed by the manufacturer for your exact model are shown.
Performance Highlights
Designed around your space
- 48", 60" and 72" single-sided models
- LED lighting in eight colors
- Stainless steel interior to reflect and magnify the flames
- Rust-resistant, stainless steel construction
- IntelliFire® ignition system
- No chimney or venting needed
- Glass wind guard to keep flame pattern steady and strong
Fuel Details
Ships as a natural gas unit. Propane conversion uses the approved kit (LPK-ODLANAIG48 for the 48-inch, LPK-ODLANAIG60 for the 60- and 72-inch), selectable in the builder above and installed by a qualified technician.
The Lanai does not need a chimney or vent pipe. Follow the outdoor installation clearances in the manual, and call us with your patio plan so we can help confirm drain pan, trim and screen options with your installer.
Maximum input varies by model and fuel. Compare the SKU-specific ratings in the specifications table below.
Product Details
What It Comes With
- One Lanai Outdoor Linear Gas Fireplace in the selected model and fuel configuration
- Stainless-steel firebox and interior
- LED accent lighting and glass wind guard
- IntelliFire ignition system
Venting or chimney components, optional accessories, construction materials and installation are sold separately unless explicitly included above.
Manufacturer warranty
The applicable Hearth & Home Technologies limited warranty sets coverage periods, component coverage, eligibility and exclusions. Review the written warranty supplied with the appliance and the linked owner’s manual; contact Smokeforges for the policy that applies to your model.
Project support
Got a project? Let’s plan the right parts.
Share your fireplace model, measurements and finish preferences. Ask about project or bulk pricing when ordering multiple units.
Specifications & Dimensions
| Specification | ODLANAIG-48 | ODLANAIG-60 | ODLANAIG-72 |
|---|---|---|---|
| BTU input | 55,000 | 65,000 | 65,000 |
| Viewing area | 47-7/8 × 17" | 60 × 17" | 72 × 17" |
| Overall width | 52-1/8" | 64-1/8" | 76-1/8" |
| Overall height | 39-1/2" | 39-1/2" | 39-1/2" |
| Overall depth | 13-3/8" | 13-3/8" | 13-3/8" |
| Framing width | 52-3/4" | 64-3/4" | 76-3/4" |
| Framing height | 39-3/4" | 39-3/4" | 39-3/4" |
| Framing depth | 13-3/8" | 13-3/8" | 13-3/8" |
| LP conversion kit | LPK-ODLANAIG48 | LPK-ODLANAIG60 | LPK-ODLANAIG60 |
| UPC | 652174951376 | 652174951383 | 197250033688 |
| Shipping weight | 215 lb | 245 lb | 295 lb |
Dimensions are in inches unless stated otherwise. Nominal size and viewing area are not the rough opening. Confirm the exact model, revision, vent route, clearances and finishing method in the installation manual before framing. The model-specific installation manual controls where a general guide differs.
Manuals, Spec Sheets & Installation
Use the document for the exact selected model and revision. Shared manuals list the covered model numbers inside the document.
