Your selected items
Got a project?
Let’s plan the right parts.
Majestic Royalton Wood-Burning Fireplace
Build your fireplace
Choose one option at a time. Each selection opens the next step; extras are optional.
A starting setup for your model
Base product + required selections shown
Your selected items
Questions about this product?
Call a product specialist: 833-777-2962
Got a project?
Let’s plan the right parts.
Majestic · Wood Burning Fireplace
A true wood fire, framed into new construction or a remodel.
This factory-built wood-burning fireplace gives you the crackle and aroma of a real wood fire in a listed, zero-clearance firebox that frames into your wall and vents through approved chimney pipe. Configure the size, finishing front and interior in the builder above; only parts listed by the manufacturer for your exact model are shown.
Performance Highlights
Designed around your space
- Front access damper handle
- Ash lip
- Safety firescreen
- Traditional refractory lining
- Dual gas knockouts (Note: Not approved for vent free logs)
- Steel grate
- Attic insulation shield
- UL/ULC listed
Fuel Details
Burns seasoned cordwood. Use only the chimney system, outside air components and clearances specified in the installation manual, and confirm local code and permit requirements before framing.
Venting components are specific to your installation and are not included. Call us with your vent route and we will help plan the parts list with your installer.
Product Details
What It Comes With
- One Royalton Wood-Burning Fireplace in the selected model configuration
- Traditional refractory lining
- Steel grate and safety firescreen
- Attic insulation shield
Venting or chimney components, optional accessories, construction materials and installation are sold separately unless explicitly included above.
Manufacturer warranty
The applicable Hearth & Home Technologies limited warranty sets coverage periods, component coverage, eligibility and exclusions. Review the written warranty supplied with the appliance and the linked owner’s manual; contact Smokeforges for the policy that applies to your model.
Project support
Got a project? Let’s plan the right parts.
Share your fireplace model, measurements and finish preferences. Ask about project or bulk pricing when ordering multiple units.
Specifications & Dimensions
| Specification | BE36 | BE42 |
|---|---|---|
| Viewing area | 36 × 21" | 42 × 21" |
| Venting | SL300 Series chimney | SL300 Series chimney |
| Overall width | 41" | 47" |
| Overall height | 39-1/2" | 39-1/2" |
| Overall depth | 21-3/8" | 21-3/8" |
| UPC | 652174746224 | 652174746231 |
| Shipping weight | 161 lb | 175 lb |
Dimensions are in inches unless stated otherwise. Nominal size and viewing area are not the rough opening. Confirm the exact model, revision, vent route, clearances and finishing method in the installation manual before framing. The model-specific installation manual controls where a general guide differs.
Manuals, Spec Sheets & Installation
Use the document for the exact selected model and revision. Shared manuals list the covered model numbers inside the document.
